Advantage 1. The lamp body is small: the LED pattern lamp is a small, very fine LED chip encapsulated in a transparent epoxy resin, so it is very small, very light, and can save a lot of materials and space in production and application .

Advantage 2: Very low energy consumption: The working voltage of the LED pattern light is generally only 2~3.6V, and the working current is only 0.02~0.03A. That is to say: it consumes no more than 0.1W of electricity, and consumes more electricity than the same light efficiency Incandescent lamps are reduced by more than 90%, which is more than 70% less than energy-saving lamps. Therefore, only LED can be called a real energy-saving light source!

Advantage three: sturdy and durable: the LED chip is completely encapsulated in epoxy resin. The small epoxy resin particles are extremely difficult to break, and the entire lamp body has no loose parts; the chip inside is extremely difficult to break, and there is little thermal effect that may volatilize and fuse. These characteristics make the LED difficult to damage. Compared with ordinary light bulbs and fluorescent lamps, LEDs are inexhaustible, countless times stronger and countless times more durable.

Advantage 4: Long service life of LED lamps: Under the right current and voltage, the service life of LED lamps can reach 100,000 hours, which means that the product life can reach more than 10 years in theory, which is longer than other types of lamps.

Advantage 5, safe and low voltage: LED lights use low-voltage DC power supply (AC can be rectified into DC), and the power supply voltage is between 6~24V, which varies from product to product. In short, it uses a DC power supply that is safer than a high-voltage power supply, and is especially suitable for homes and public places.

Advantage 6: Wide application range: Due to its compact size, each unit LED chip is 3~5mm square or round, so it is more suitable for preparing devices with complex modeling processes. For example, the manufacture of soft, bendable lamp tubes, lamp strips, and special-shaped lights is currently only suitable for LEDs.

Advantage 7: More colorful colors: Previously, the color of lamps on the market was very single. To achieve the color purpose, one is to paint or cover the surface of the lamp, and the other is to fill the lamp with inert gas to emit light, so the richness of the color is affected Restrictions. LED is digitally controlled, and the light-emitting chip currently emits a variety of colors, including red, green, and blue. It is precisely with these three colors that can be restored to the colorful world through system control.

Advantage 8: Less heat emission: LED is a more advanced cold light source. It does not radiate a lot of infrared and ultraviolet like incandescent lamps and fluorescent lamps. It is especially suitable for lighting cultural relics, jewelry, high-end cosmetics and other valuables. There is almost no current heating effect like incandescent lamps, and it will not be affected by thermal expansion and contraction. It will not make the bulb yellow, will not accelerate the aging of the lamp, and will not cause a greenhouse effect on the surrounding environment.

Advantage 9: Less environmental pollution: The protective effect of LED on the environment is mainly manifested in three aspects:

First, there is no harm from metallic mercury. The LED pattern lamp does not use high-hazard mercury like fluorescent lamps, and there will be no public hazards such as mercury ions and phosphors that may leak during the bulb manufacturing process or after it is broken.

Second, the epoxy resin used to make LEDs is an organic polymer compound, which has good physical and chemical properties after curing, has high bonding strength to chips and metals, is hard and flexible, is stable to salt and alkali and most solvents, and is not easily damaged. , It can be recycled and reused even after damage or aging, without pollution to the environment.

Third, the particle layout of LED lamps and display screens generally generates scattered light, which rarely produces light pollution.

Advantage 10: Cost savings: Compared with incandescent lamps, fluorescent lamps, and LED pattern lamps, the purchase price is higher. However, due to the extremely low energy consumption of LEDs, a large amount of electricity can be saved in the long term, and the investment in lamp replacement can be saved, so the comprehensive use cost is more cost-effective.